Popular on Amzeal


Similar on Amzeal

AKCP Adds Dew Point Calculation to sensorProbe+ Devices

Amzeal News/10405679
SP2+ with PoE
AKCP, the world's oldest and largest supplier of networked wired and wireless sensor solutions has added a dew point calculation virtual sensor on the sensorProbe+ (SP+) platform.

LOS ANGELES - Amzeal -- Available to existing customers as a firmware update, the SP+ series of base units calculate dew point from temperature and humidity values. The input for the calculation is provided by an AKCP dual temperature and humidity sensor.

What is Dew Point?

Air holds moisture in the form of humidity. The amount of moisture it can hold is correlated with the temperature of the air. The dew point is the temperature at which the air becomes saturated (100% relative humidity). When this point is reached the air can no longer hold any more moisture in its gaseous state and condensation will occur.

Why monitoring Dew Point is important in the Data Center

More on Amzeal News
Condensation causes water damage to structures and electronic equipment. ASHRAE standards state that the dew point should be maintained between 5.5°C (41.9°F) and 15°C (59°F). Maintaining correct relative humidity (RH) in a data center is important. If the RH is too low equipment becomes susceptible to electrostatic discharge (ESD). However, when humidity is too high, as humidity is related to the dew point, water condensation occurs which leads to equipment corrosion.

How is Dew Point Calculated?

There are several equations that can be used to approximate the dew point values. Some take into account air pressure as well. The AKCP dual temperature and humidity sensors provide all the information needed to calculate within +/- 1°C the dew point.

For more details on the sensorProbe+ devices and how you can utilize them in your facilities visit www.akcp.com

ABOUT AKCP

More on Amzeal News
AKCP established in the USA in 1981, has 30+ years experience in professional sensor solutions. AKCP created the market for networked temperature, environmental and power monitoring in the data center. Today with over 150 employees and 200,000 installations, AKCP is the world's oldest and largest manufacturer of networked wired and wireless sensors. AKCP has several divisions tailored to the needs of different industries.

https://intelli-tower.com

https://warehouse-tech.com

https://pharma-mon.com

https://hvactechblog.com

Contact
AKCP
***@akcp.com


Source: AKCP
stats
Show All News | Report Violation

0 Comments